h16wd series ? ratings from 25a to 90a @ 48-660 v ac ? 1600 volt blocking ? scr output for heavy industrial loads ? dc control ? zero-crossing (resistive loads) or random-fire (inductive loads) output ? optional led status indicator product selection control voltage 25a 50a 75a 90a 4-32 vdc h16wd6025 h16wd6050 h16wd6075 h16wd6090 available options output specifications (1) description 25a 50a 75a 90a operating voltage (47-440hz) [vrms] 48-660 48-660 48-660 48-660 transient overvoltage [vpk] 1600 1600 1600 1600 rated load current (2) [arms] 25 50 75 90 rated load current {ul508 motor controller} (2) [arms] 10 20 30 45 minimum load current [marms] 150 150 150 150 maximum off-state leakage current @ rated voltage [marms] 1.0 1.0 1.0 1.0 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 500 500 500 maximum 1 cycle surge current (50/60hz) [apk] 239/250 597/625 954/1000 1145/1200 maximum i2t for fusing (50/60hz) [a2 sec] 285/259 1779/1621 4555/4150 6560/5976 thermal resistance juncti on to case (rjc) [c/w] 1.02 0.63 0.31 0.28 maximum on-state voltage drop @ rated current [vpk] 1.6 1.6 1.6 1.6 hp rating ul 508/iec60947[hp (kw)]: 240 vac 1.5 (1.1) 3 (2.2) 5 (3.7) 7.5 (5.6) hp rating ul 508/iec60947[hp (kw)]: 380 vac 2 (1.5) 5 (3.7) 7.5 (5.6) 15 (11.2) hp rating ul 508/iec60947[hp (kw)]: 480 vac 3 (2.2) 5 (3.7) 10 (7.4) 20 (14.9) hp rating ul 508/iec60947[hp (kw)]: 600 vac 3 (2.2) 10 (7.4) 15 (11.2) 25 (18.6) wire size max (solid/stranded) [awg/ iec mm2] 2 x 8/8.4 2 x 8/8.4 2 x 8/8.4 2 x 8/8.4 output terminal screw torque range [in lb (nm) 18-20 (2-2.2) 18-20 (2-2.2) 18-20 (2-2.2) 18-20 (2-2.2)
input specifications (1) description dc control control voltage range 4-32 vdc must turn-off voltage 1 .0 vdc maximum reverse voltage 32 vdc minimum input current @ mi nimum voltage (for on-state) 9ma maximum input current @ maximum voltage 11ma nominal input impedance see note 4 maximum turn-on time [msec] (5) 1/2 cycle maximum turn-off time [msec] 1/2 cycle wire size max (solid/stranded) [awg/ iec mm2] 2 x 12 / 3.3 led status indicator (color) w/g option (green) input terminal screw torque range: 8-10 in lb (0.9-1.1nm) general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 10 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -40 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 3 oz (86.5 g) housing material thermoplastic polyester ssr mounting torque range [in lbs/nm] 18-20 (2-2.2) baseplate material aluminum rohs exemption #?s 5(a), 7(a), 7(c)-i general notes general notes 1) all parameters at 40c and per section unless otherwise specified. 2) heat sinking required, see derating curves. 3) off-state dv/dt test method per eia/ narm standard rs-443, paragraph 13.11.1 4) input circuitry version incorporates active current limiter. 5) turn-on time for dc control random turn-on versions is 0.02 msec wiring diagram
mechanical specifications thermal derate information agency approvals designed in accordance with the requirements of iec 62314 iec 61000-4-2 : electrostatic discharge ? level 3 iec 61000-4-4 : electrically fast transients ? level 3 criteria b iec 61000-4-5 : electrical sur ges ? level 3 criteria b rev. 120811
annex - enviromental information
|
